Fireball Dragon Stainless Steel Hardware
Not sure what length to buy? Use this Hardware Measurement Tool.
Dragon Stainless Steel Hardware is engineered to maximize durability and longevity to meet the needs of the new skateboarders to professional skateboarders and longboarders alike. Fear stripped hardware no longer.
Note that the nuts in this set are NOT stainless steel, but rather steel coated in zinc. Stainless steel bolts matched with stainless nuts is highly prone to cold welding.
Drive Types
FLAT PHILLIPS - Classic skateboard hardware head. Sinks into the board to provide maximum fastening strength on top mounted boards. Requires a Phillips Head bit or driver. These cannot be felt under feet.
BUTTON ALLEN - Sits atop the deck or trucks, rather than countersunk like the Flat Allen and Flat Phillips. Requires a 1/8”allen bit or driver. Comes with stainless steel washers to prevent damage to deck or trucks. Works best on drop-thru decks, but still works on top mounted decks. The bolt head can be felt under feet, allowing riders to correct foot placement.
FLAT ALLEN - Uses the same head shape as the Flat Phillips, except requires a 1/8” allen bit or driver, for reduced risk of stripping. These cannot be felt under feet.
Design Inspiration
While most hardware bolts are steel with some kind of paint or coating, the bolts in this set are full stainless steel. This hardware can withstand extreme usage and beatings, along with all weather conditions. Guaranteed.
Specifications
- Construction - Stainless steel bolts with zinc coated steel nuts
- Drive Types – Flat Phillips, Flat Allen and Button Allen
- Flat Phillips - Used for top mounted boards.
- Flat Allen- Used for top mounted boards.
- Button Allen - Used for drop-through mounted boards.
- Length - All drive heads come in lengths ranging from 1”to 3” to for customizing your setup.
- Designed specifically for skateboards
Disclaimer: Ride with caution and always wear a helmet.
You may also like
Dragon Precision Spacers and Speed Rings
Dragon Precision Spacers and Speed Rings are manufactured to provide a precision fit with extremely low tolerances in-between your skateboard bearings. This allows you to crank your axle nut all the way down, which in turn reduces slop and increases the longevity, durability and performance of your bearings by great amounts.
Design Inspiration
We here at Fireball were tired of rattling coming from our bearings and spacers due to imperfections in the manufacturing process of bearings spacers. Many other spacers are manufactured with stamped steel, causing a sloppy fit. This causes the bearing to have higher tolerances and lose its roll speed over time. We’re not sure about you, but we like to make our gear last as long as possible.
Specifications
- Width - 0.405”(10.29 mm)
- Axle Size - 8mm
- Precision Machined for Extremely Tight Tolerances - Between +/- 0.02 mm
- Construction - Iron with Zinc Coating for protection from rust.
- Durability - Equal to the durability of stamped steel with a more precise fitment.
- Perfect Fitment for Dragon Endure and Race Bearings - Designed and tested to work extremely well with our Dragon Bearing lineup.
Disclaimer: These Spacers and Speeds rings will cause your board to
accelerate at speeds which can potentially cause combustion. Ride with caution and always wear a helmet.
INSTALLATION:
- Remove everything from the skateboard axle
- Place a Dragon Speed Ring (small washer) on the axle
- Place a bearing on the axle with the shield towards the middle of the skateboard
- Place a Dragon Spacer on the axle
- Place a bearing on the axle with the shield towards the middle of the skateboard
- Push wheel down on the bearing with the outward part of the wheel facing towards the middle of the skateboard
- Remove wheel and seated bearing from the axle
- Flip wheel and place it back on the axle, installing the second bearing
- Place a Dragon Speed Ring on the axle
- Tighten axle nut down all the way (some clicking is often normal, bearing is fully seating into the wheel)
- Repeat and go shred!
Not sure what length to buy? Use our Hardware Measurement Tool.
Finally black hardware that doesn't rust and strip! Fireball Dragon Hardware is designed to last for the long haul. These bolts and nuts are full stainless steel, which is stronger and much more resistant to rust.
Three Head Types
Dragon Hardware also comes with a choice of three head types: Flat Allen, Flat Phillips, or Button Allen. Each one of these has a specific application that it is best for.
Flat Allen
Best for skateboards that want flush in deck mounting hardware and allen key head for additional strip resistance.
Flat Phillips
Best for skateboards that want flush in deck mounting hardware and ease of use with Phillips screwdriver head.
Button Allen
Best for longboards that want raised hardware for under feet feel or easy mounting on drop through boards. Allen key head provides additional strip resistance.
Beast Guarantee
All Fireball products come with the Beast Guarantee, which promises against defects. Even if the product is worn out from normal use, Fireball will give 25% replacements under this top quality promise.
Specifications
- Length: 1.0", 1.25", 1.5", 1.75", 2.0", 2.25", 2.5", 2.75", 3.0" / 2.54cm, 3.18cm, 3.81cm, 4.45cm, 5.08cm, 5.72cm, 6.35cm, 6.99cm, 7.62cm
- Grade: Stainless steel bolts with steel zinc coated nuts
- Special Features: High quality bolts with limited lifetime guarantee
Improved performance & Longevity
Perhaps the simplest way to increase performance and longevity of your wheels, bearings and trucks. Each kit comes with 8x Speed Rings, 4x Spacers and 4x Zinc Coated Axle Nuts designed to reduce friction between the bearing, axle nut and hanger in order to increase speed and promote longer lasting parts.
Designed to fit almost any brand of skateboard truck (8mm) and manufactured to the highest standards in the industry.
Specifications
- Designed to fit: Standard 8mm Truck Axles
- Strip Resistance: Nuts are made from Zinc Coated Steel offering strip resistance when installed correctly
- Spacers & Speed Rings: Iron with zinc coated speed rings are molded specifically, with spacers machined from high quality aluminum, both to tight tolerances of + / - 0.02mm
- Pack Contains: 8x Speed Rings, 4x Spacers, 4x Axle Nuts
- 100% Satisfaction Guarantee: Fireball stand behind their products and offer a full money back guarantee if you aren't 100% satisfied with you purchase